When I was showing our friend how to clean out his outdoor A/C condenser unit, I had to stress how important it was to shut off the power to the component before getting started! I explained that he didn’t want to reach in there as well as clean things up as well as have the component turn on; Also, you could electrocute yourself if you were not careful or even cause serious injure to the component which would cause the whole Heating, Ventilation, as well as A/C method to fail… He took note of all this while I went on to explain how to clean the inside of the component.

  • I went over scrubbing the fan blades carefully so you do not bend them, then we went on to taking out any debris inside the condenser.

The last step was to carefully spray out all the debris that is stuck on the fin coils from the inside going outwards; You definitely don’t want to spray all the debris inside the outdoor equipment because you want everything out of it, and while we were spraying the fin coils, I pointed out that some of the fin coils were bent. He seemed upset care about we disfigured the equipment, but I explained to him that the service was legitimately easy for that. I pulled out the fin coil brush as well as showed him how to legitimately straighten the coils back separate from any issues. He tried it as well as could see how easy it was but I kept stressing that you have to be legitimately gentle with the coils because they are legitimately disfigured. When we had everything finished, we put the top back on the condenser equipment as well as we fired the A/C method back on, and my friend was amazed at how much better the a/c was working, as well as the A/C was ice cold!

Electric heat pump